
Fernhill Barrel Hall
Zinc-grey standing seam over a new insulated deck on a 1920s timber hall, phased around harvest so it never closed.
- Roof
- 4,800 sq ft
- On site
- 5 weeks
- Harvest days lost
- None
The brief
The hall stores barrels from September to March and pours for visitors all summer. Its corrugated roof had rusted through at the laps, and every winter a bucket line ran down the centre aisle.
What we found
Under the corrugated sheet the purlins were sound but the 1920s skip boards had rotted along both eaves, and there was no insulation at all, so the barrel room swung twelve degrees between day and night.
What we did
- Built a new plywood deck over the old purlins, with two inches of rigid insulation and a vapour layer so the barrel room holds its temperature.
- Rolled 18-inch zinc-grey panels on site from a single coil, so every panel runs eave to ridge without a joint.
- Worked the roof in three bays so the tasting room stayed open and the barrel room was never open to weather overnight.
- Finished the ridge with a vented closure and replaced the downspouts with 4-inch rounds that empty into the existing drains.
How it ended
The hall has been through one harvest and one wet season with the new roof. The barrel room now holds within three degrees, and the bucket line is gone.


How the time went
One foreman for the whole job, and a written update at the end of every week.
- Weeks 1–2
- Deck and insulation, bay by bay
- Weeks 2–4
- Panels rolled and set
- Week 5
- Ridge, trims and downspouts

Let’s get on your roof.
Forty-five minutes on the ladder, photos of every plane and a written price within 48 hours. Free inside Portland city limits.
Leaking now? Leak line (503) 555-0149